 Click to enlarge
|
 Click to enlarge
|
 Click to enlarge
|
 Click to enlarge
|
|
MULTI PARKING
Because each elevator and cart is operated independently on each level, entry and exit is quick. Retrieval time of a vehicle is less than two minutes.
Low noise and vibration. Elevators never touch guide rails, use of urethane rollers minimize noise when transferring pallets from elevator to carts and then to parking slot.
Entry and exit is very quick and convenient. We incorporate a built in turntable on each elevator.
Completely equipped with multiple sensors and triple safety devices. A self malfunction diagnostic control provides you with an excellent level of safety and reliability.
Has the capability of holding cue memory when multiple patrons come to retrieve there vehicles during rush hours..
The Multi-Parking system has been designed to automatically move the
vehicles by lift which then transfers it to a waiting cart on one of the multi- levels. The carts then travel
horizontally and place the vehicle in its appropriate slot. This system is suitable for middle and large-scale
buildings as well as independent public parking garage.
The multi-parker can accommodate as little as 20 vehicles to several thousand units. It is therefore suitable for large scale projects. It can move more than 2 vehicles at the same time for maximum efficiency.
Related Downloads:
Short lifting movie 1 (MPEG FORMAT) (3 MB)
Short lifting movie 2(MPEG FORMAT) (3 MB)
|
TOWER PARKING
Minimal land use. An area of 7mx7m can park up to 50 vehicles.
Low noise and vibration. Elevators never touch guide rails, use of urethane rollers minimize noise when transferring pallets from elevator to storage area.
Entry and exit is very quick and convenient. We incorporate a built in turntable on the elevator and retrieval time is less than two minutes.
Completely equipped with multiple sensors and triple safety devices. A self malfunction diagnostic control provides you with an excellent level of safety.
Has the capability of holding cue memory when multiple patrons come to retrieve there vehicles during rush hours.
The elevator type often called the Parking Tower,
is designed to automatically move the vehicles on a pallet vertically on the elevator, it then transfers
it horizontally left or right for storage. Very fast retrieval time is accomplished in less than two
minutes. This system is suitable for medium or large scale buildings. It can also be used as a stand
alone tower for a parking garage business. Since it is controlled by an integrated computer system,
the overall operation can be viewed with one screen and its operation is very user friendly.
We incorporate German motors and components are used in every system by world known SEW Eurodrive.
|
 Click to enlarge
|
 Click to enlarge
|
 Click to enlarge
|
 Click to enlarge
|
|
 Click to enlarge
|
 Click to enlarge
|
 Click to enlarge
|
 Click to enlarge
|
|
SQUARE PARKING
With eight times the space efficiency of a ramped garage, this system can use the narrow basement spaces to its maximum capacity.
Up to six levels can be equipped with this new technology.
With the adoption of the high speed lifting mechanism, the elevating speed has become very quick, thereby significantly shortening the time required for entering and leaving.
With our upper entrance design, it is convenient because the built-in turntable allows for easy entry and exit.
After entering the vehicle in the parking garage, the parking system
is designed to move the vehicles vertically with elevators on each end. The garage consists of several levels
where the vehicles are moved horizontally which rotate the pallets in conjunction with the elevators..
The multi floor circulation type is suitable for small and mid-sized buildings because of its high space
efficiency.
Related Downloads:
Short lifting movie 1 (MPEG FORMAT) (2 MB)
Short lifting movie 2(MPEG FORMAT) (4 MB)
|